Paving Installation Guidelines

Standard Patio Paver Guide

1. Use a good rubble base such as white quarry rubble approximately 75mm deep and compact well
2. Follow with either quartz or washed concrete sand of approximately 30mm depth and level to prepare for paving.
3. Lay the pavers.
4. Use silicone sweeping sand such as Paveset or similar mix if wanted. Ensure all the sand is swept off the pavers into gaps and following instructions for the product used, water in and leave to set.

Driveway Guide (Using 45mm & 60mm pavers)

1. Use a good rubble base such as white quarry rubble approximately 150mm deep for a 60mm paver and 150mm deep for a 45mm paver and compact well
2. Follow with either a quartz or washed concrete sand of approximately 30mm depth and level to prepare for paving.
3. Lay the pavers.
4. Use silicone sweeping sand such as Paveset or similar mix if wanted. Ensure all the sand is swept off the pavers into gaps and following instructions for the product used, water in and leave to set.

This information is to be used as a guideline only. Quantum Stone will not accept liability for the use of this Guide or its interpretation. Quantum Stone recommends the use of a professional pavers/installer.